with alarm
Close all doors.
Insert key into ignition switch.
Wait 5 seconds.
Within 10 seconds:
Switch ignition on and off 4 times.
Switch ignition ON.
Ensure SECURITY LED illuminates.
Within 30 seconds:
Open and close driver's door.
Switch ignition OFF.
The horn will sound and indicators will flash once.
Within 30 seconds:
Open and close driver's door once to program a new key code whilst retaining the original codes or twice to program a new key code whilst erasing the original codes.
Switch ignition ON and OFF.
Horn sounds and indicators flash, once or twice depending which mode has been selected.
Simultaneously press and hold key lock and unlock buttons.
Press key lock or unlock button for a minimum of 1 second and release.
Within 3 seconds:
System should now lock and unlock vehicle.
NOTE: If system locks and unlocks vehicle twice, programming procedure has not been completed. Repeat button procedure.
If required repeat button procedure to program remaining keys.
NOTE: To exit programming mode: Open driver's door.